Follow these steps to connect the USB floppy disk drive to your windows computer
and install the driver software
| 1. |
Turn on your PC. |
| 2. |
Plug the USB floppy disk drive cable into a USB port of your PC.
The system will automatically detect the drive and display "Found New
Hardware Wizard" |
| 3. |
Click at the "Next" button. |
 |
| 4. |
Click the "Search for the best drivers for a suitable driver
for my devices (Recommended)", then click the "Next" button. |
 |
| 6. |
Click to "Specify a location" and click at "Next" button".
"D:win2k" as the location of the driver software, then click
at the "Next" button.
D: is the drive letter of your PCs CD-ROM which contains the device
driver CD.
|
 |
| 7. |
"D:\\USBFDD\WIN2K" as the location of the driver software,
then click at the "OK" button
D: is the drive letter of your PCs CD-ROM which contains the device
driver CD.
|
 |
| 8. |
Windows will note you that Windows is ready to install the driver.
Click at the "Next" button to continue. |
 |
| 9. |
Windows complete the instillation. Click at the "Finish"
button to close this wizard. |
 |
| 10. |
A floppy icon will then appear on the my Computer
folder, after finishing instilling the device driver. |
