Follow these steps to connect the USB floppy disk drive to your windows computer
and install the driver software
| 1. |
Turn on your PC. |
| 2. |
Plug the USB floppy disk drive cable into a USB port
of your PC. The system will automatically detect the drive and display "Found
New Hardware Wizard" |
| 3. |
Click at the "Next" button. |
 |
| 4. |
Click the "Search for the best drivers for a suitable driver
for my devices (Recommended)", then click the "Next" button. |
 |
| 5. |
Click to "Specify a location" and click at "Next" button".
"D:winme" as the location of the driver software, then click
at the "Next" button.
D: is the drive letter of your PCs CD-ROM which contains the device
driver CD.
|
| 6. |
Windows will note that Windows is ready to install
driver. Click at the "Next" button to continue. |
 |
| 7. |
Windows has now finished installing the software for the USB
floppy drive. Click at "Finish" button to close this wizard. |
 |
| 8. |
A floppy icon will then appear on the my Computer
folder, after finishing instilling the device driver. |
