AA2850 USB 2.0 SATA adapter

Features

Complies with USB specification 2.0
Data transfer rate of upto 480Mb
Complies with USB Storage Class specification
Complies with SATA specification 2.0
Automatic Serial ATA 3.0, 1.5 Gbps speed negotiation
Operating system supported
- Windows 98, 98SE, ME, 2000 and XP
- Mac OS 9.X, X
- Linux 2.4.0 or later
Supports power down mode and USB suspend indicator
Supports wakeup ability
Full range high power adapter. Input AC 90 ~ 240V
Support Drive:
- 3.5" SATA HDD with LBA48 mode for HDD over 120G
- 2.5" SATA HDD with LBA48 mode for HDD over 120G
- 5.25" SATA DVD, ±R & ±RW drive

Connect the adapter to the DC jack
Make sure the power switch is "Off" before you connect the SATA device to the SATA adapter
Connect the SATA adapter to the SATA device.
Attach the AC adapter to the AC outlet

Start your computer and wait until widows has been loaded.
Turn on the power of the adapter. The status LED turns from on to off as soon as the device is ready.
Connect the USB to corresponding port on your PC.
Windows recognises the connected adapter automatically.
Before you unplug or turn off the power of the adapter while windows is running.
Ensure disable the connection from the "safe remove utility" which is located in the task bar. Failure to do this, might result in loss of data.

Start your computer and wait until the OS has been loaded.
Turn on the power of the adapter. The STATUS LED turns from on to off as soon as the device is ready.
Connect the USB cable to the corresponding port of your computer.
MAC recognises the connected device automatically.
Before you unplug or turn off the power of the SATA adapter while the MAC is running. Ensure you drag the icon into the trash before removing the SATA adapter. Failure to do this, might result in loss of data.

Full range high power adapter. Input AC 90 ~ 240V

Output 12V, 2.5A up to 30W support all SATA devices.