AA2813 two port video splitter and booster
Introduction
 |
This video splitter broadcasts and boosts one VGA signal source for 2 VGA
monitors respectively. There is no software or interface card to install. Just
connect the cables (not supplied), power up the system and you are are ready to
have duplicated VGA images for multiple monitors with excellent quality. Superb
high bandwidth circuit enables high resolution VGA signal of 350Mhz to be displayed
on multiple monitors. |
NOTE
Cables are NOT supplied. Suitable cables can be found
here.
Connections
- Plug in the AC to DC adapter
- Connector the VGA input, from PC to the 15 pin high density male plug connector
- Connector the monitors to the 15 pin high density female socket connectors.
Operation
- ACTIVE LED turns on when there is a VGA signal at the input port
- POWER LED turns on when the video splitter is power up by the AC 9V power
adapter.
Specification
Function
|
2 Port
|
4 Port
|
8 Port
|
| Number of VGA outputs |
2
|
4
|
8
|
| Signal bandwidth |
350 Mhz
|
350 MHz
|
300 MHz
|
| Video Resolution |
1920 x 1440 @ 80 Hz
|
1920 x 1440 @ 80 Hz
|
1900 x 1200 @ 80Hz
|
| Signal type |
VGA, SVGA, Multi-sync
|
| Cable length |
65M (210 feet) maximum
|
| LED |
Power, green
|
| |
Active, amber
|
| Connectors |
Input |
HDB15 pin male plug x 1
|
HDB15 pin male plug x 1
|
HDB15 pin male plug x 1
|
| |
Output |
HDB15 female socket x 2
|
HDB15 female socket x 4
|
HDB15 female socket x 8
|
| Power consumption |
AC 9V, 200 mA, normal operation
10 Ma, power save mode
|
| Enclosure |
Metal
|
| Weight |
400g
|
428g
|
720g
|
| Dimensions (mm) |
20 x 85 x 180
|
40 x 196 x 70
|
|
