AA2734 Modular RJ45 plug, crimp, strip and cutting tool

Instruction

1. Squeeze the handles and open the lock
2. Cut the modular cable to the desired length. Make certain that the end is cut squarely and not diagonally.
3. Insert the flat cable between the stripper blades. Squeeze the handles, then
   pull the cable from the tool.
   Note: The cable must be kept perpendicular to the tool.
4. For stripping round cable, insert the cable into the stripping hole and then turn the cable.
5. Remove the outer jacket, insert the stripped cable into the plug
6. Place the inserted cable into the modular plug, make sure that the stripped wire is to the end of the plug, then place the tools holder. Make sure that the plug is fully into the holder before crimping. Squeeze the handles until they connect.