Image 1Image 2

AA2759 Single telephone extension socket and box

Info image

Wiring Instructions

  1. Remove cable entry point and attach box to wall.
  2. Carefully strip about 70mm of sheath from the cable and 3cm of insulation from each wire.
  3. Pass the cable into the box and connect wires to terminals as shown in the table below
  4. Secure cable to the anchor point using plastic tie around the cable sheath. Trim off end of tie.
  5. Tuck wires into box and secure socket to box, ensuring no wires are trapped

Colour Code

Screw terminal connection number

Cable colour

(Primary/secondary)

1
Green/White (if present)
2
Blue/white
3
Orange/white
4
White/orange
5
White/blue
6
White/green (if present)

NB: Only terminals 2, 3, 4 and 5 are used on domestic installations.

Warnings

Not suitable for outdoor instillation.

Not suitable as a replacement for an existing UK telephone primary socket.