Image 1Image 2

AA3200 Slave Phone and ADSL filter wall plate and back box, screw connections

Info image

Instructions

  1. Remove wall plate back box by removing the two screws on the front face
  2. Fix wall plate to skirting or wall with screws supplied, allowing adequate space for cable entry.
  3. Insert existing telephone wires into screw connections on the ADSL face plate,
    following cable colour coding according to the list below. Ensure screws are correctly tightened
  4. Screw wall plate onto the back box with screws supplied, ensuring screws are sufficiently tightened

Terminal

Connection

1
Not used
2
Blue with white banding
3
Orange with white banding
4
White with orange banding
5
White with blue banding
6
Not used

Information

  • No need for external filter
  • Surface fitting, replaces existing wall plate
  • Quick setup
  • With back box

Multiple telephone connections, long runs of cables, typically over 20M or low quality telephone cable cane adversely effect the performance of your connection speed

Safety Information

Before carrying out any electrical work, always switch off at the mains. If in doubt consult a qualified electrician.