AA3718 Crimp tool, RJ45, RJ12, RJ11l, 8P8C, 6P6C, 4P4C connectors

Instructions

1. Cut the modular cable to the desired length. Make certain that the ends are cut squarely.
2. Insert the cable between the strippers blades until it touches the stop. Squeeze the handles and pull the tool so that the cables stays perpendicular to it. If done correctly the outer insulation of the cable will be removed without damaging the insulation on the inner conductors.
3. Place a modular plug in the holder so that the front of the plug is against the stop and the gold contacts face the crimper. Insert the prepared cables into the plug. Make certain that the inner conductors are flush with the tip of the conductor and directly under the gold contacts. Squeeze the handles firmly to set the contacts and secure the cable, thus completing the operation.